1/12/17 South cam issues

Tell us what interesting thing you saw on the web-cams.

1/12/17 South cam issues

Unread postby Sharon Evans » Fri Jan 12, 2018 7:51 am

Looks like the south cam has gone down for some reason. Checked it with Edge and Chrome, other 2 are working.
Sharon Evans
Conductor
Conductor
 
Posts: 4886
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: 1/12/17 South cam issues

Unread postby Jason Rose » Fri Jan 12, 2018 8:04 am

Yup, it's down. I can't get to it from the internal network either.

I'll see if I can get someone to restart the power to the coal tipple. That might get it. If not, it'll have to wait for spring.
Jason Rose
<><
Ferroequinearcheologist-in-Training
RioGrandeExplorations.net
Spring, Texas - MP 209.7 - UP Palestine Sub
"All that is necessary for the triumph of evil is that good men do nothing"
"The price of freedom is eternal vigilance" - Wendell Phillips
"Life is tough, but it's tougher when you're stupid." - Sgt Stryker USMC
“Life is too short to deal with other people’s drama.” – Sgt Jason Rose USMC
User avatar
Jason Rose
Moderator
Moderator
 
Posts: 2796
Joined: Thu Nov 17, 2011 1:09 pm
Location: Spring, Texas (MP 209.7 - UP Palestine Sub)

Re: 1/12/17 South cam issues

Unread postby Jason Rose » Fri Jan 12, 2018 11:19 am

We've done all we can do remotely. It's gonna be dead for a while... likely until Work Session A. Perhaps longer.
Jason Rose
<><
Ferroequinearcheologist-in-Training
RioGrandeExplorations.net
Spring, Texas - MP 209.7 - UP Palestine Sub
"All that is necessary for the triumph of evil is that good men do nothing"
"The price of freedom is eternal vigilance" - Wendell Phillips
"Life is tough, but it's tougher when you're stupid." - Sgt Stryker USMC
“Life is too short to deal with other people’s drama.” – Sgt Jason Rose USMC
User avatar
Jason Rose
Moderator
Moderator
 
Posts: 2796
Joined: Thu Nov 17, 2011 1:09 pm
Location: Spring, Texas (MP 209.7 - UP Palestine Sub)

Re: 1/12/17 South cam issues

Unread postby Sharon Evans » Fri Jan 12, 2018 2:13 pm

So possibly not available on opening day.
Sharon Evans
Conductor
Conductor
 
Posts: 4886
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: 1/12/17 South cam issues

Unread postby Jason Rose » Fri Jan 12, 2018 2:27 pm

I wouldn't count on it.

If I can get up there later this winter or for Work Session A AND the problem is easily remedied, then yes. But, more than likely I'll have to diagnose the problem and get the parts ordered for someone else (likely John Engs) to install at a later date.

If life consisted of just me and my wife (like in the olden days), I'd head up there next weekend. But my priority these days is my son and I no longer have that kind of flexibility with time or finances.
Jason Rose
<><
Ferroequinearcheologist-in-Training
RioGrandeExplorations.net
Spring, Texas - MP 209.7 - UP Palestine Sub
"All that is necessary for the triumph of evil is that good men do nothing"
"The price of freedom is eternal vigilance" - Wendell Phillips
"Life is tough, but it's tougher when you're stupid." - Sgt Stryker USMC
“Life is too short to deal with other people’s drama.” – Sgt Jason Rose USMC
User avatar
Jason Rose
Moderator
Moderator
 
Posts: 2796
Joined: Thu Nov 17, 2011 1:09 pm
Location: Spring, Texas (MP 209.7 - UP Palestine Sub)

Re: 1/12/17 South cam issues

Unread postby Sharon Evans » Fri Jan 12, 2018 8:39 pm

I understand that completely Jason. I will operate with depot and north cams until you get it fixed.
Sharon Evans
Conductor
Conductor
 
Posts: 4886
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: 1/12/17 South cam issues

Unread postby John Cole » Wed Jan 17, 2018 7:32 am

Jason, I will be out A&B & our team has a couple of projects for Chama. Perhaps we can get Steve and/or John Engs to help.

With a little luck we can get the camera up for opening day.
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm

Re: 1/12/17 South cam issues

Unread postby Jason Rose » Wed Jan 17, 2018 7:55 am

Thanks, John. I'll give you a call later to discuss.

John Engs will be in Chama next month and will, I believe, do some initial triage.
Jason Rose
<><
Ferroequinearcheologist-in-Training
RioGrandeExplorations.net
Spring, Texas - MP 209.7 - UP Palestine Sub
"All that is necessary for the triumph of evil is that good men do nothing"
"The price of freedom is eternal vigilance" - Wendell Phillips
"Life is tough, but it's tougher when you're stupid." - Sgt Stryker USMC
“Life is too short to deal with other people’s drama.” – Sgt Jason Rose USMC
User avatar
Jason Rose
Moderator
Moderator
 
Posts: 2796
Joined: Thu Nov 17, 2011 1:09 pm
Location: Spring, Texas (MP 209.7 - UP Palestine Sub)

Re: 1/12/17 South cam issues

Unread postby John Cole » Wed Jan 17, 2018 11:58 am

I talked to John this morning and he said he thinks it is the power supply for the cameras, other than physical damage to the camera's wires, could it be anything else?
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm

Re: 1/12/17 South cam issues

Unread postby Jason Rose » Wed Jan 31, 2018 9:35 am

Quick update: I spoke with John Engs last night. He's heading over to Chama in March. While there, he'll do some triage and assess the situation. Worst case, he'll pull the camera down and ship it to me for further analysis. If I can't fix it, I'll deliver it to the manufacturer, which happens to be here in Houston, for repair or replacement.

With any luck, we'll set things right in time for Opening Day.
Jason Rose
<><
Ferroequinearcheologist-in-Training
RioGrandeExplorations.net
Spring, Texas - MP 209.7 - UP Palestine Sub
"All that is necessary for the triumph of evil is that good men do nothing"
"The price of freedom is eternal vigilance" - Wendell Phillips
"Life is tough, but it's tougher when you're stupid." - Sgt Stryker USMC
“Life is too short to deal with other people’s drama.” – Sgt Jason Rose USMC
User avatar
Jason Rose
Moderator
Moderator
 
Posts: 2796
Joined: Thu Nov 17, 2011 1:09 pm
Location: Spring, Texas (MP 209.7 - UP Palestine Sub)

Re: 1/12/17 South cam issues

Unread postby Tom Casper » Wed Jan 31, 2018 10:24 am

What is your thought on updating the camera while it is down. It is a few years old and there must be better models with better lens available now. Maybe we could start a fund to update it in March and keep the old one for a backup or a new place.

Tom C.
Later:
tom at srclry dot com
A student of the Southend RGS!
Tom Casper
Conductor
Conductor
 
Posts: 806
Joined: Wed Jan 25, 2012 3:25 pm
Location: Southwest of the Windy City

Re: 1/12/17 South cam issues

Unread postby Jason Rose » Wed Jan 31, 2018 10:59 am

Good idea, but unlikely to happen because:

1) We aren't using the full capacity of the current cameras due to bandwidth restrictions. They can do far more than you can see over the stream.
2) We would have to pay for increased capacity of the internet circuit.
3) We would have to pay for increased capacity of the camera stream that is re-broadcast by a third party. We pay for the stream on a per-Gigabit basis. Increasing the resolution will increase the usage and the cost.

Higher Resolution = More Bandwidth = Increased Cost (for both the circuit and the stream)

Everyone agrees that the cameras pay for themselves (figuratively) in terms of public good will and some increased ticket sales (though this hasn't been quantified that I know of). However, the cameras still need to be paid for in a literal sense and they don't generate any revenue. Every dollar the Friends raise really should go to the preservation efforts and there are a LOT of projects underway and planned for the future. It's astounding how much is accomplished! Diverting funds for the cameras is a hardship. Donations absolutely help offset the cost, but they're sporadic, unreliable, and rarely sufficient.

We have discussed the idea of a subscriber-based system in the past and it's likely time to revisit it. I'll call the leadership in the near future to discuss. In short, the subscribers would get a higher resolution and longer time-out period on the cameras (maybe an hour). A lot of discussion needs to happen and a lot of technology needs to be payed for and configured to get it done. But, if there is enough demand for it, I don't see any reason we couldn't make it happen. In this scenario, the cameras would begin to pay for themselves and that's a good thing.

*The current free service would not be impacted.

More later...
Jason Rose
<><
Ferroequinearcheologist-in-Training
RioGrandeExplorations.net
Spring, Texas - MP 209.7 - UP Palestine Sub
"All that is necessary for the triumph of evil is that good men do nothing"
"The price of freedom is eternal vigilance" - Wendell Phillips
"Life is tough, but it's tougher when you're stupid." - Sgt Stryker USMC
“Life is too short to deal with other people’s drama.” – Sgt Jason Rose USMC
User avatar
Jason Rose
Moderator
Moderator
 
Posts: 2796
Joined: Thu Nov 17, 2011 1:09 pm
Location: Spring, Texas (MP 209.7 - UP Palestine Sub)

Re: 1/12/17 South cam issues

Unread postby Tom Casper » Thu Feb 01, 2018 9:30 am

OK i see. Thanks for the reminder to donate as I have been lax in sending funds.

Tom C.
Later:
tom at srclry dot com
A student of the Southend RGS!
Tom Casper
Conductor
Conductor
 
Posts: 806
Joined: Wed Jan 25, 2012 3:25 pm
Location: Southwest of the Windy City

Re: 1/12/17 South cam issues

Unread postby Melanie Neale » Thu Feb 01, 2018 5:56 pm

Dear All

I have followed the thread. The cameras are important to all of us who do not live in the area and indeed those like me from the UK. Actually it was a link to the webcam that brought me to the site and eventually a 2014 a visit.

I fully understand the the $ has to go around for all the projects. Has anybody done a cost analysis to try and bring the cam's to a state that has been suggested in the thread. For my part I would be happy to subscribe (I do as a Friend). How about "crowdfunding" to raise money. Remember the cams are our eyes to your world.....just a thought......

Melanie
Melanie Neale
Brakeman
Brakeman
 
Posts: 20
Joined: Tue Aug 02, 2016 7:06 am
Location: London England

Re: 1/12/17 South cam issues

Unread postby Tom Casper » Fri Feb 02, 2018 10:38 am

Melanie and others. Go to the Friends web site home and click on the link to donate. There is a place for web cam donations. I went there yesterday to warm the pot!

Tom C.
Later:
tom at srclry dot com
A student of the Southend RGS!
Tom Casper
Conductor
Conductor
 
Posts: 806
Joined: Wed Jan 25, 2012 3:25 pm
Location: Southwest of the Windy City

Re: 1/12/17 South cam issues

Unread postby Robert Brigham » Sun Feb 04, 2018 9:53 pm

Tom Casper wrote:Melanie and others. Go to the Friends web site home and click on the link to donate. There is a place for web cam donations. I went there yesterday to warm the pot!

Tom C.


Me too! :smiley24:
Robert Brigham
Head Brakeman
Head Brakeman
 
Posts: 85
Joined: Thu Jun 02, 2016 6:31 pm
Location: Escondido, CA

Re: 1/12/17 South cam issues

Unread postby Melanie Neale » Mon Feb 05, 2018 3:41 am

Hi have done so also....however does not quite address the points raised in my post though.....
Melanie Neale
Brakeman
Brakeman
 
Posts: 20
Joined: Tue Aug 02, 2016 7:06 am
Location: London England

Re: 1/12/17 South cam issues

Unread postby Tom Casper » Mon Feb 05, 2018 10:29 am

I thought Jason did in his reply to my post as why it doesnt matter to upgrade. I little while back, the cams were down, due to, to much bandwidth being used and the Voice over IP phone system was crippled.

Tom C.
Later:
tom at srclry dot com
A student of the Southend RGS!
Tom Casper
Conductor
Conductor
 
Posts: 806
Joined: Wed Jan 25, 2012 3:25 pm
Location: Southwest of the Windy City


Return to Web Cameras

Who is online

Users browsing this forum: No registered users and 22 guests

cron