DAY FOUR - WORK SESSION 'F'

Discussion Pertaining to Work Session F - 2012

DAY FOUR - WORK SESSION 'F'

Unread postby Ted Smith » Thu Aug 16, 2012 6:51 pm

Two big events occurred on this, the fourth day of our last work session for a while: the Gramps frameless tank cars, being restored in Antonito, are BACK on their trucks, and once the restoration work is complete, will be once again rolling on home rails. And - the Cumbres Pavilion, overlooking some pretty spectacular scenery behind the snow shed, is now essentially complete. The Friends' team assisting Richard Tower were able to assemble the picnic tables and they are now ready for visitors from the Fiesta Train on Saturday!

We have Parts I and II again to give you some good coverage of all of the activities! Hard to believe that tomorrow is not only "wrap up" but "pack up" for the next few months until May work sessions!

Ted and Linda
004.JPG
Team Leader Chris Trunk clears the area of debris so the crane can move forward to begin lifting the second frameless tank onto its trucks
005.JPG
First frameless tank car has been set on its trucks! Yea!
006.JPG
Crane operator moves cables into position to initiate lifting of tank car
008.JPG
Frameless tank car lifted off the ground - no problem!
009.JPG
The crane operator starts the swing over the trucks
011.JPG
Frameless tank is lowered to check for proper clearance
012.JPG
Frameless tank is lifted - clearance is not correct. Chris Trunk identifies the four spacers needed to be removed for proper clearance
013.JPG
Hardy Cruse cuts the spacer bolts with a torch
015.JPG
Crane company employee gives directions to crane operator as Chris Trunk places bolster pin into position
020.JPG
Both frameless tank cars are back on the rails where they belong; however, there's plenty of work left on both cars!
Ted Smith
Head Brakeman
Head Brakeman
 
Posts: 99
Joined: Mon Nov 28, 2011 11:46 pm

Re: DAY FOUR - WORK SESSION 'F'

Unread postby Jason Rose » Thu Aug 16, 2012 7:26 pm

Amazing!

:cheers:
Jason Rose
<><
Ferroequinearcheologist-in-Training
RioGrandeExplorations.net
Spring, Texas - MP 209.7 - UP Palestine Sub
"All that is necessary for the triumph of evil is that good men do nothing"
"The price of freedom is eternal vigilance" - Wendell Phillips
"Life is tough, but it's tougher when you're stupid." - Sgt Stryker USMC
“Life is too short to deal with other people’s drama.” – Sgt Jason Rose USMC
User avatar
Jason Rose
Moderator
Moderator
 
Posts: 2796
Joined: Thu Nov 17, 2011 1:09 pm
Location: Spring, Texas (MP 209.7 - UP Palestine Sub)

Re: DAY FOUR - WORK SESSION 'F'

Unread postby Roger Hogan » Thu Aug 16, 2012 7:45 pm

Gooood job on the photos Ted.
Roger Hogan
Roger Hogan
Conductor
Conductor
 
Posts: 6487
Joined: Mon Nov 28, 2011 3:30 pm
Location: Chama, New Mexico

Re: DAY FOUR - WORK SESSION 'F'

Unread postby John Cole » Fri Aug 17, 2012 6:01 am

All those work sessions in Alder Gulch to work for their surplus trucks are really paying off now. Each of these trucks would have cost the Friends over $25,000 to re-create new, so doing the math you see almost $100 grand in trucks going under these tank cars. Kudos to Dave Grant for telling us about them, and to Ed Lowrance for putting the deal together and being the project leader all three summers there, and all the Friends members who traveled to Alder Gulch for weeks each summer for three years to help them fix up their railroad to work off the trade. Certainly a win-win deal for all parties!
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm

Re: DAY FOUR - WORK SESSION 'F'

Unread postby Ted Smith » Fri Aug 17, 2012 2:41 pm

Thanks, John, for giving this some context. You are so right! The Alder Gulch work paid off in so many ways - and it was definitely of mutual benefit!!!
Linda
Ted Smith
Head Brakeman
Head Brakeman
 
Posts: 99
Joined: Mon Nov 28, 2011 11:46 pm

Re: DAY FOUR - WORK SESSION 'F'

Unread postby Tim Tennant » Fri Aug 17, 2012 3:11 pm

John, I have to second Linda's comment on your assessment of what we received for our labor on the Alder Gulch. You can now see the value of our three-year investment in performing work for the Montana Heritage Commission. This is what the end result was intended to be. Thanks.
User avatar
Tim Tennant
Engineer
Engineer
 
Posts: 434
Joined: Mon Nov 21, 2011 4:04 pm

Re: DAY FOUR - WORK SESSION 'F'

Unread postby John Cole » Sat Aug 18, 2012 4:39 pm

When Chris Trunk wrote that article in the Dispatch about the frameless cars years ago, I loved reading it but doubted that we would ever get all the pieces together, and be able to raise the tens of thousands it would take to make them run again. When the Alder Gulch truck deal happened, then it appeared that yes those cars are going to come back to life.

Chris not only did the research for the article, but he agreed to lead the teams every year to put them back together. Chris spent his own time and money to have missing parts fabricated, and even learned how to do hot riveting to install them. On top of that he even went to Alder Gulch to help work off their trade and personally loaded the first five trucks to return to Chama. Now not only do we have the correct trucks for the frameless (Gramps) cars, but we have GENUINE UTLX arch bar trucks that we are putting back under the narrow frame cars so they now have their correct trucks for the first time in a half century. Amazing!

If ever you needed proof of what a dedicated Friends member who stays focused can accomplish for the CATS here it is.
John Cole
Conductor
Conductor
 
Posts: 729
Joined: Mon Nov 28, 2011 12:55 pm


Return to Work Session F (August 13-17)

Who is online

Users browsing this forum: No registered users and 1 guest

cron