Page 1 of 1

chama stock pens

Unread postPosted: Sun Mar 20, 2016 2:09 pm
by Leon Beier
i need history and pictures of sotck pens.thankyou

Re: chama stock pens

Unread postPosted: Mon Mar 21, 2016 8:02 am
by Tom Casper
Leon, they are scattered thru the work session reports. Looks like they should be linked here also.

Tom C.

Re: chama stock pens

Unread postPosted: Mon Mar 21, 2016 8:16 am
by Rich Murray
Leon, you might try contacting the Albuquerque office. If there is any historical information that would be the most likely place to find it. There is only one part time volunteer working with those records so please be patient. 505 880 1311

Re: chama stock pens

Unread postPosted: Mon Mar 21, 2016 11:42 am
by Doug Frederick
If you need modern day pictures, contact me -soon-. I live here and drive past them every day.

The grass is growing, and when it's up, you lose 50% or more of visibility.

Doug- "popeye8762@gmail.com".

Re: chama stock pens

Unread postPosted: Tue Mar 22, 2016 8:33 am
by Tom Casper
Hey Doug, how about some general shots to put in this folder? As you say, do it know or wait for the weeds to die!

Tom C.

Re: chama stock pens

Unread postPosted: Tue Mar 22, 2016 12:24 pm
by Leon Beier
Doug i kive in Chama Now. I was looking for old pictures of the stock pens in action and history of when they were built. I am team leader for the project in c d e and f sessions.

Re: chama stock pens

Unread postPosted: Thu Mar 24, 2016 4:34 am
by Doug Frederick
Let me know what you need, Leon!

Re: chama stock pens

Unread postPosted: Thu Mar 24, 2016 11:29 am
by Ian Kelly
Hey Leon, congrats on moving to Chama and the promotion to Team Leader! If you are looking for historical photos of the stock pens, the Dorman collection is probably the best place to start looking - I believe you can search it online.

Re: chama stock pens

Unread postPosted: Thu Mar 24, 2016 12:00 pm
by Doug Frederick
Leon- you may know this, but, one of the stock pen gates is outside the carpenter shop, strapped to a luggage wagon. The gate is not quite complete- There are boards cut and lightly tacked on.