Friends of the Cumbres & Toltec - FriendsOfCumbresToltec.org • View topic - 7/30/19 Tuesday

7/30/19 Tuesday

First unread post • 5 posts • Page 1 of 1

7/30/19 Tuesday

by Sharon Evans » Mon Jul 29, 2019 12:39 pm

Six shots from Antonito for Tuesday.

: 2019.07.30 Salad for lunch (1 of 1).jpg (90.19 KiB) Viewed 1896 times

: 2019.07.30 The coal that is in the OY tender has to be removed, dirty as the job is (1 of 1).jpg (64.95 KiB) Viewed 1896 times

: 2019.07.30 Parts for the drop bottom gon are being readied (1 of 1).jpg (116.84 KiB) Viewed 1896 times

: 2019.07.30 Work comtinues on the Gramps tank car (1 of 1).jpg (85.89 KiB) Viewed 1896 times

: 2019.07.30 Work on the lathe to gets parts ready (1 of 1).jpg (93.6 KiB) Viewed 1896 times

: 2019.07.30 Well Mr. Morris brings his own hard hat to the party (1 of 1).jpg (114.81 KiB) Viewed 1896 times

Here are more Antonito photos done by Pat Maufrais.

: 2019.07.30 Looking at the rotting end beam on OY's tender (1 of 1).jpg (97.45 KiB) Viewed 1804 times

: 2019.07.30 Another angle on this beam (1 of 1).jpg (91.47 KiB) Viewed 1803 times

: 2019.07.30 Working inside of the shop at Antonito cutting threads on bolts (1 of 1).jpg (76.93 KiB) Viewed 1803 times

: 2019.07.30 The finished product (1 of 1).jpg (81.12 KiB) Viewed 1803 times

: 2019.07.30 Working on the end sill of the Gramps tank car (1 of 1).jpg (86.24 KiB) Viewed 1803 times

: 2019.07.30 This is, I believe, a truck frame (1 of 1).jpg (81.34 KiB) Viewed 1803 times

.

Last edited by Sharon Evans on Sat Aug 03, 2019 12:07 pm, edited 3 times in total.

Sharon Evans: Conductor; Posts: 4886; Joined: Tue Oct 21, 2014 2:54 pm; Location: Glen Allen, VA

Re: 7/30/19 Tuesday

by Craig Kumler » Sat Aug 03, 2019 10:52 am

Thanks Sharon!

Craig Kumler: Engineer; Posts: 392; Joined: Mon Nov 28, 2011 4:24 pm; Location: San Jose, Ca.

Re: 7/30/19 Tuesday

by Sharon Evans » Sat Aug 03, 2019 11:44 am

You are welcome Craig and I feel some better today and will get on the rest of session E.

Sharon Evans: Conductor; Posts: 4886; Joined: Tue Oct 21, 2014 2:54 pm; Location: Glen Allen, VA

Re: 7/30/19 Tuesday

by Sharon Evans » Sat Aug 03, 2019 12:08 pm

deleted

.

Last edited by Sharon Evans on Sat Sep 07, 2019 12:40 pm, edited 2 times in total.

Sharon Evans: Conductor; Posts: 4886; Joined: Tue Oct 21, 2014 2:54 pm; Location: Glen Allen, VA

Re: 7/30/19 Tuesday

by Sharon Evans » Sat Aug 03, 2019 12:26 pm

Some photos from Chama on Tuesday.

: 2019.07.30 Getting masking in place before painting the cab of 483 (1 of 1).jpg (72.98 KiB) Viewed 1802 times

: 2019.07.30 Cutting a hole into the engineer side cylinder of 483 (1 of 1).jpg (97.76 KiB) Viewed 1802 times

: 2019.07.30 In the Chama wood shop cutting boards for 1204 (1 of 1).jpg (102.67 KiB) Viewed 1802 times

: 2019.07.30 Working on the rider gon 1204 (1 of 1).jpg (99.63 KiB) Viewed 1802 times

: 2019.07.30 Getting the new wood attached (1 of 1).jpg (110.92 KiB) Viewed 1802 times

: 2019.07.30 Hard at work on the end sill of 1204 (1 of 1).jpg (89.92 KiB) Viewed 1802 times

.

Sharon Evans: Conductor; Posts: 4886; Joined: Tue Oct 21, 2014 2:54 pm; Location: Glen Allen, VA

5 posts • Page 1 of 1

Return to Work Session E (July 29-Aug 2)

Jump to:

Who is online

Users browsing this forum: No registered users and 1 guest