Friends of the Cumbres & Toltec - FriendsOfCumbresToltec.org • View topic - 2019-06-21 Friday day 5 session C

Page 1 of 1

2019-06-21 Friday day 5 session C

Posted: Sat Jun 01, 2019 1:36 pm

by Sharon Evans

I have nothing yet from Chama but here is a shot from Antonito sent my way.

: 6.19.19 Antonito with Linda Dueker and Ian Kelly. Linda ran the food service there. (1 of 1).jpg (88.26 KiB) Viewed 3069 times

.

Re: 2019-06-21 Friday day 5 session C

Posted: Sat Jun 22, 2019 1:08 pm

by Sharon Evans

Here are the Friday photos from Chama.

: 2019.06.21 The Friends are also responsible for upkeep of the line side mileposts and here is one ready (1 of 1).jpg (60.64 KiB) Viewed 3045 times

: 2019.06.21 Stock car 5674 is getting a new coat of paint (1 of 1).jpg (110.12 KiB) Viewed 3045 times

: 2019.06.21 Working under rider gon 1204 (1 of 1).jpg (96.27 KiB) Viewed 3045 times

: 2019.06.21 Touching up the paint on the new dorr to the paint car 3686 (1 of 1).jpg (77.97 KiB) Viewed 3044 times

: 2019.06.21 The crew from boxcar 5553 are painting small parts (1 of 1).jpg (87.72 KiB) Viewed 3044 times

: 2019.06.21 Looks like wood filler is being applied to an endsill on 5553 (1 of 1).jpg (69.84 KiB) Viewed 3044 times

: 2019.06.21 Attaching new side frame wood to 5553 (1 of 1).jpg (70.11 KiB) Viewed 3043 times

: 2019.06.21 Using the bigger hammer approach in straightening one of the door rails to 5553 (1 of 1).jpg (95.55 KiB) Viewed 3043 times

: 2019.06.21 The young member of the 5553 crew is carrying a piece of sheet metal (1 of 1).jpg (85.93 KiB) Viewed 3043 times

: 2019.06.21 One of the new door to 5553 is placed on the floor of the woodshop showing the outside hardware (1 of 1).jpg (84.54 KiB) Viewed 3043 times

: 2019.06.21 An inside view of the new door (1 of 1).jpg (63.19 KiB) Viewed 3043 times

: 2019.06.21 Working on cutting wood pieces for repair (1 of 1).jpg (82.8 KiB) Viewed 3043 times

: 2019.06.21 Using the belt sander to get the new door ready to paint (1 of 1).jpg (57.42 KiB) Viewed 3043 times

.

Re: 2019-06-21 Friday day 5 session C

Posted: Sun Jun 23, 2019 10:59 am

by Sharon Evans

A few more from Friday were forwarded to me by John Cole all taken by Don Atkinson.

: 2019.06.21 The stenciling crew is hard at work (1 of 1).jpg (119.02 KiB) Viewed 2991 times

: 2019.06.21 Putting the car number on the freshly painted side (1 of 1).jpg (83.86 KiB) Viewed 2991 times

: 2019.06.21 Getting a length of pipe cut to size (1 of 1).jpg (75.58 KiB) Viewed 2991 times

: 2019.06.21 The cut is done (1 of 1).jpg (113.25 KiB) Viewed 2991 times

: 2019.06.21 The work is moving ahead on stock car 5691 (1 of 1).jpg (115.41 KiB) Viewed 2991 times

.

Re: 2019-06-21 Friday day 5 session C

Posted: Sun Jun 23, 2019 2:05 pm

by Sharon Evans

Warren Ringer is sending me more shots from Antonito, will post once I process them.

: 2019.06.21 Fuzzy is working on getting rivits out of the coupler pocket (1 of 1).jpg (89.63 KiB) Viewed 2948 times

: 2019.06.21 Sparks fly as Fuzzy grinds on the rivits (1 of 1).jpg (91.73 KiB) Viewed 2948 times

: 2019.06.21 Using a hammer and punch to drive the rivit out (1 of 1).jpg (93.04 KiB) Viewed 2948 times

: 2019.06.21 The end result, a rivit is removed (1 of 1).jpg (87.05 KiB) Viewed 2948 times

: 2019.06.21 Moving wheels to track so they can be used next week (1 of 1).jpg (98.6 KiB) Viewed 2948 times

: 2019.06.21 The wheel now placed on the track (1 of 1).jpg (95.3 KiB) Viewed 2948 times

: 2019.06.21 Lift the truck frame to move it to the track (1 of 1).jpg (74.64 KiB) Viewed 2948 times

: 2019.06.21 The wheels and frame are ready to make a truck (1 of 1).jpg (87.97 KiB) Viewed 2948 times

.