Monday 7/23/18

Discussion Pertaining to Work Session E - 2018

Monday 7/23/18

Unread postby Sharon Evans » Sun Jul 22, 2018 12:35 pm

As work begins today, I thought I would post overview shots of the yard so anyone looking could see where specific projects are, unless they are in the swamp.
2018-07-23 Overview of yard from south tipple cam.jpg
To the left on the connector track are box car 3090 closest to us and the conversion of P-box 213 back to box car 3476 behind, to the right past the woodshop are the 3 cars moved yesterday. I think the furthest 2 are our storage cars.
2018-07-23 Overview of yard from south tipple cam.jpg (110.27 KiB) Viewed 4953 times

2018-07-23 Overview of yard from north tipple cam.jpg
In the center right of the shot, white in colour, is the re-build of the open passenger gon. Not sure if that will get work this session.
2018-07-23 Overview of yard from north tipple cam.jpg (112.06 KiB) Viewed 4953 times
Sharon Evans
Conductor
Conductor
 
Posts: 4886
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Monday 7/23/18

Unread postby Chris James » Tue Jul 24, 2018 10:34 am

More from Monday, via the Chroniclers

introduction.jpg
As always, the Session begins with a welcome and a safety lecture


barryvincent-toolcar.jpg
Barry Vincent in the Tool Car


food.jpg
The "Kitchen Ladies" prepare to feed the ravenous crews


roof_monday.jpg
Work continues of the conversion of the P-Box back to a "real" boxcar


crew.jpg
The P-Box Crew


disassembly.jpg
Disassembly continues on High Side Gon 1000


crew.jpg
High Side Gon 1000's crew


brad_painting.jpg
New roof walks get a coat of paint from Brad


brad and.jpg
Who's this Kevin Clayton guy with Brad? He can't be a Friends member because he's under 65 years old...


chimney.jpg
Up on Cumbres, work begins on rebuilding the chimney in the Car Inspector's House


front-step.jpg
Outside, the front step is getting a rebuild
Last edited by Chris James on Tue Jul 24, 2018 2:51 pm, edited 1 time in total.
Chris James
Editor, C&TS Dispatch
Albuquerque, NM
User avatar
Chris James
Engineer
Engineer
 
Posts: 353
Joined: Tue Nov 29, 2011 10:01 am
Location: Sandia Park, NM

Re: Monday 7/23/18

Unread postby Craig Kumler » Tue Jul 24, 2018 11:06 am

Thanks for all the nice pics folks!
Craig Kumler
Engineer
Engineer
 
Posts: 392
Joined: Mon Nov 28, 2011 4:24 pm
Location: San Jose, Ca.

Re: Monday 7/23/18

Unread postby Sharon Evans » Tue Jul 24, 2018 5:44 pm

More from Monday:
2018-07-23 The Monday morning safety briefing continues on expectations.jpg
The Monday morning safety briefing continues on expectations

2018-07-23 This is the railroad safety officer briefing on their safery expectations.jpg
This is the railroad safety officer briefing on their safety expectations

2018-07-23 Doc McMullen looks happy to get to work.jpg
Doc McMullen looks happy to get to work

2018-07-23 Sparks litterly fly as work progresses on open gon 1000.jpg
Sparks litterly fly as work progresses on open gon 1000

2018-07-23 The stencil crew is hard at work lettering this rebuilt flat car.jpg
The stencil crew is hard at work lettering this rebuilt flat car

2018-07-23 Chronicoler Mick Mee takes a picture of a work crew.jpg
Chronicler Mick Mee takes a picture of a work crew




.
Last edited by Sharon Evans on Wed Jul 25, 2018 9:43 am, edited 2 times in total.
Sharon Evans
Conductor
Conductor
 
Posts: 4886
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Monday 7/23/18

Unread postby Tom Eikerenkotter » Tue Jul 24, 2018 7:55 pm

Great work going on, but appears flat car 6746 is becoming #6747. Is that correct?
Tom Eikerenkotter
Brakeman
Brakeman
 
Posts: 6
Joined: Thu Sep 06, 2012 9:41 am
Location: Beavercreek, Ohio

Re: Monday 7/23/18

Unread postby Sharon Evans » Wed Jul 25, 2018 4:49 am

That is what the pictures seem to show. Had me confused when checking FIDO for the work being done.
Sharon Evans
Conductor
Conductor
 
Posts: 4886
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Monday 7/23/18

Unread postby Chris James » Wed Jul 25, 2018 9:57 am

the Project list on FIDO says:

10. Paint 6746 using current best practices following repair before deck is installed.
11. Letter 6746 following repair, maintenance and painting to historic standard.

So I'm not sure what's going on. It could be a lettering error like this one from 2016 (since corrected...)!

FlangerOK.jpg
Oopsie... perhaps stencils need to say "This Side Up."
Chris James
Editor, C&TS Dispatch
Albuquerque, NM
User avatar
Chris James
Engineer
Engineer
 
Posts: 353
Joined: Tue Nov 29, 2011 10:01 am
Location: Sandia Park, NM

Re: Monday 7/23/18

Unread postby Jason Rose » Wed Jul 25, 2018 2:14 pm

Well... it looks "OK" to me.



Apologies. Couldn't help myself. :smiley16:
Jason Rose
<><
Ferroequinearcheologist-in-Training
RioGrandeExplorations.net
Spring, Texas - MP 209.7 - UP Palestine Sub
"All that is necessary for the triumph of evil is that good men do nothing"
"The price of freedom is eternal vigilance" - Wendell Phillips
"Life is tough, but it's tougher when you're stupid." - Sgt Stryker USMC
“Life is too short to deal with other people’s drama.” – Sgt Jason Rose USMC
User avatar
Jason Rose
Moderator
Moderator
 
Posts: 2796
Joined: Thu Nov 17, 2011 1:09 pm
Location: Spring, Texas (MP 209.7 - UP Palestine Sub)

Re: Monday 7/23/18

Unread postby Greg Coit » Sat Jul 28, 2018 8:31 am

The pictures of the box car being worked on is actually the Friends paint storage boxcar. The P-Box being restored to a boxcar is across the main line from this one. in the pictures are Gary Tim and myself.

Greg Coit
Bayfield, CO
Greg Coit
Head Brakeman
Head Brakeman
 
Posts: 96
Joined: Fri Jan 18, 2013 6:28 pm

Re: Monday 7/23/18

Unread postby Sharon Evans » Sat Jul 28, 2018 10:45 am

Thanks Greg it is the 3686 if I have my numbers correct.
Sharon Evans
Conductor
Conductor
 
Posts: 4886
Joined: Tue Oct 21, 2014 2:54 pm
Location: Glen Allen, VA

Re: Monday 7/23/18

Unread postby Greg Coit » Sat Jul 28, 2018 5:18 pm

That's the one! :)

Greg Coit
Bayfield, CO
Greg Coit
Head Brakeman
Head Brakeman
 
Posts: 96
Joined: Fri Jan 18, 2013 6:28 pm

Re: Monday 7/23/18

Unread postby Patti Lounsbury » Sat Aug 18, 2018 11:44 am

Yep, that was just me having a "senior moment" on 6746. I moved the wrong number. Needed more coffee, but, no fear, it was corrected before we even began lettering the other side. It did cause a bit of confusion for the morning's chronicler, though, to find it changed before they came back.
Patti Lounsbury
Brakeman
Brakeman
 
Posts: 2
Joined: Fri Jun 08, 2018 6:27 pm


Return to Work Session E (July 23-27)

Who is online

Users browsing this forum: No registered users and 1 guest

cron