Page 1 of 1

Wednesday June 28, 2017

Unread postPosted: Wed Jun 28, 2017 4:10 pm
by Joe Kanocz
Here are some pics from Chama

Kitchen car got primer today
20170628_142815.jpg


Bill Lock is preparing a still beam for a stock car
20170628_135114.jpg


Today's departure included equipment for Cumbres
20170628_095633.jpg


Very few open seats in any car
20170628_100002.jpg


Mary Jane and Nancy are making lunches
20170628_080756.jpg


Stealth ride box is getting a new floor
20170628_080525.jpg


A big thank you to John Cole for the air compressor!
20170628_075837.jpg


Flat car is getting new ship lap Decking
20170628_075753.jpg


Chronicling in the foreground and FIDO in the background. FIDO is the Friend’s system for materials
20170628_080230.jpg


Water car waiting paint
20170628_075956.jpg


Interior of the water car
20170628_080028.jpg

Re: Wednesday June 28, 2017

Unread postPosted: Wed Jun 28, 2017 6:29 pm
by John Cole
Even though that air compressor is rated at 15cfm@175 psi, Chuck tells me it took quite a while to fill the 75 gallon air tank, as well as the 120 gal storage tank on the Jordan spreader. According to Chuck, those big cylinders on the spreader really sucked up the air.

I hope someone got video of the Jordan in action.

Re: Wednesday June 28, 2017

Unread postPosted: Wed Jun 28, 2017 6:35 pm
by Joe Kanocz
Tonight the group dinner was a tailgate at the Cumbres section house. Bob Conry opened the building and turned on the lighting for everyone to enjoy.
20170628_185929.jpg

20170628_185821.jpg

In the kitchen notice the chimney built on bookcase style shelving.
20170628_185809.jpg

20170628_185743.jpg

Re: Wednesday June 28, 2017

Unread postPosted: Wed Jun 28, 2017 7:21 pm
by Craig Kumler
Thanks Joe for the superb plcs!

Re: Wednesday June 28, 2017

Unread postPosted: Thu Jun 29, 2017 6:46 am
by Jason Rose
Nicely done, Joe. Much appreciated.